aspensurgical Bovie® Surgi-Center | Pro™ 200W Veterinarian Electrosurgical Generator | Aspen Surgical A2350-V

Bovie® Surgi-Center | PRO™ 200W Veterinarian Electrosurgical Generator | Aspen Surgical A2350-V

The Bovie 2350-V is the premier electrosurgery unit from Bovie for Animal Health procedures. This unit is intended for cutting, coagulation, ablation of a variety of tissues. The Bovie 2350-V is suitable for general procedures, tumor removals, and gingivectomy procedures performed in an operating suite and procedure room. The Bovie 2350-V was engineered with the technology and safety of more expensive electrosurgical units but economically priced for animal health practice. The Bovie 2350-V offers more electrosurgery modalities than lower watt models including four (4) blend settings, allowing Veterinarians to deliver safe and precise energy applications during more complex surgical procedures. Dual monopolar ports can be activated simultaneously in fulguration to control bleeding or treat superficial tissue. The dual ports can also be utilized separately in different modes. The Cut II specialized laparoscopic mode is engineered with a lower voltage than competitive units reducing the risk of alternate site burns and increasing patient safety during minimally invasive procedures. Bovie FDFS technology measures tissue impedance 5,000,000 times a second and adjusts output 5,000 times a second for consistent energy delivery in a variety of tissues. Bipolar features are activated using a separate dedicated foot control maintaining sterility during the procedure. 10 presets for quick and easy setup.

Video

Video

Included

Included Items

Specifications

• Technical Specifications

  MONOPOLAR	WATTS	VPEAK MAX VOLTAGE	CREST FACTOR (TYPICAL)	FREQUENCY (KHZ)
  Cut I	200	1000V	1.7 ± 20%	490 kHz ± 4.9 kHz
  Cut II	200	750V	1.7 ± 20%	490 kHz ± 4.9 kHz
  Blend (1)	200	1320V	1.8 ± 20%	490 kHz ± 4.9 kHz
  Blend (2)	200	1475V	2.0 ± 20%	490 kHz ± 4.9 kHz
  Blend (3)	200	1650V	2.2 ± 20%	490 kHz ± 4.9 kHz
  Blend (4)	200	1870V	2.4 ± 20%	490 kHz ± 4.9 kHz
  Pinpoint Coagulation	120	1800V	3.1 ± 20%	490 kHz ± 4.9 kHz
  Spray Coagulation	120	4000V	6.0 ± 20%	350 to 450 kHz
  Gentle Coagulation	120	450V	1.6 ± 20%	490 kHz ± 4.9 kHz

  BIPOLAR	WATTS	VPEAK MAX VOLTAGE	CREST FACTOR (TYPICAL)	FREQUENCY (KHZ)
  Macro Bipolar	80	600V	1.5 ± 20%	490 kHz ± 4.9 kHz
  Micro Bipolar	80	500V	1.5 ± 20%	490 kHz ± 4.9 kHz
  Standard Bipolar	50	250V	1.5 ± 20%	490 kHz ± 4.9 kHz

  
  Technical Specifications:

  • Lifespan: Reusable
  • Sterilization Status: Non-sterile

  
  Electrical Specifications:

  • Cooling System: Passive Cooling
  • Technology: Isolated RF Output
  • Audible/Visible Output Meter: Yes
  • Pre-set Feature: Yes
  • Monopolar HP Ports: 2 Port(s)
  • Connector Ports/Power Switch: White
  • Contact Monitoring Systems Range/Trip Point: 10 ohms or less over entire operating range (10C° to 40°C)
  • Dual Activation Tone Alert: Yes

   

  Features

  Features

  ENERGY SETTINGS

  CUT

  Cut I

  A general cutting with a standard RF waveform used in open and endoscopic surgical procedures, Cut I is for use in a wide range of tissue with minimal hemostasis.

  Cut II

  Tailored specifically for Laparoscopic procedures, Cut II offers a precisely managed cutting energy that limits output for minimizing the potential risk of capacitive coupling and alternate site burns due to weakened insulation.

  Blend (Level 1, 2, 3 & 4)

  Blended cutting offers varying levels of hemostasis during a cut procedure providing increased control of bleeding at the surgical application site.

  • Level 1: 75% Duty Cycle
  • Level 2: 62.5% Duty Cycle
  • Level 3: 50% Duty Cycle
  • Level 4: 37.5% Duty Cycle

   

  Cut

  COAGULATION

  Pinpoint

  A general coagulation mode delivering rapid desiccation effects with minimal tissue damage.

  Spray

  Recommended for hemostasis in highly vascular or large surface areas and for non-contact tissue coagulation to control superficial bleeding. Spray mode permits dual, simultaneous activation of two monopolar accessories with audible dual activation tone alert.

  Gentle

  Gentle mode offers more concentrated coagulation than in other modes. When coagulation is necessary in short amounts of time, reduced electrode carbonization is provided.

  
  Safety Specifications:

  • Latex-Free: Yes

   

  Resources

  Resources

  Catalogs:

  • Bovie® Product Catalog
  • Bovie Animal Health Specialty Brochure

  IFUs:

  • Bovie® A2350-V User Guide

   

  Overview

  SPECIALIZED LAPAROSCOPIC MODE

  Bovie’s Cut II is tailored specifically for Laparoscopic procedures. The mode offers a precisely managed cutting energy that limits output thereby minimizing the potential risk of capacitive coupling and alternate site burns.

  DUAL MONOPOLAR SPRAY ACTIVATION

  The Bovie 2350-V offers simultaneous activation in spray with audible activation tones. The simultaneous delivery produces equal and even power outputs in each accessory, for a safer delivery of dual monopolar energy.

  ADJUSTABLE POWER DURING ACTIVATION

  The power can be adjusted up or down in variable steps while performing a procedure, to increase procedural efficiency and provide the appropriate amount of power to the surgical site.

  SURGICAL MEMORY TECHNOLOGY

  The 2350-V recalls the last used power and mode. The surgeon can store 10 user-defined RF presets for easy recall.

  PATIENT SAFETY FEATURES

  • Bovie FDFS™ – The tissue sensing technology measure tissue 5 million times a second and adjusts to varying impedances 5000 times a second for accurate energy delivery.
  • Automatic system self-checks upon powering up the unit.